Cooking With Craft Gin

What is craft gin and what are the benefits of it

The benefits of cooking with craft gin can include a unique flavour and aroma that cannot be replicated by any other type of liquor. Craft gin can add a fresh new element of taste to your favourite dishes.

Recipes for appetizers, entrees, desserts, and more using craft gin as an ingredient

Here are some recipes to make some glorious tasting dishes using craft gin.


Thai Green Curry with Shrimp – First clean and shell your shrimp, then marinate them in the gin for ten minutes. Then add them to a Thai green curry that has been simmering away on the stovetop and stir well. Add some chopped cilantro leaves just before serving it out onto plates with jasmine rice or sticky rice alongside it.
Lobster Bisque – Lobster bisque can taste sensational when made using a bit of craft gin. First make a roux using butter, flour and gin. Then add some onions to the mixture for flavour before adding your fish stock along with chopped lobster meat. Stir well until boiling point is reached, then let it simmer away gently on low heat for twenty minutes.


Pork Chop Oreganato – This is one tasty Italian classic that you can cook using gin. First marinate some pork chops overnight to give them extra flavour before adding garlic salt, black pepper, chopped oregano leaves for taste, along with generous amounts of olive oil. Grill away over medium heat for five minutes each side or until golden brown before serving garnished with fresh lemon wedges alongside your choice of salad vegetables if desired.
Pan Seared Scallops – Clean each scallop by removing its brown end then dry them off very thoroughly using paper towels, before placing them into a bowl of craft gin marinade that has been sitting overnight in the fridge. Leave this mix to sit at room temperature while you make your risotto as they will be ready just about when your risotto comes out of the oven. Season both sides of each scallop with salt before cooking.
Gourmet Grilled Cheese Sandwich using craft gin is made by infusing the milk with the gin and onion, then adding this to your base before you finish off by melting cheese into it.
Cheese & Craft Gin Fondue – Stir in some fresh lemon juice for an extra kick of citrus flavour to go along with a basket full of bread cubes, apple slices and dried apricots at the end when everything is melted together.


Raspberry Lemon Cream Pie – You can use some gin to make this delicious dessert by adding it to the raspberry mixture.
Gin & Tonic Panna Cotta – Add a few drops of gin into this panna cotta for an added zing that will have you coming back for more.
Pecan Pie with Craft Ginger Beer Syrup – The sweet, caramel flavours in both pecan pie and ginger beer pair nicely with craft gin, so it is no surprise these ingredients are featured together here.
Cheesecake – You can infuse your cheesecake base by adding some craft gin or even use it as part of the topping by whipping up some cream cheese frosting infused with it.

How to cook with different types of gin

There are different flavours of artisanal gin in the market, so what kind of dishes should be made with each different kind? Here are some suggestions:

Bombay Sapphire Gin is great for cooking Asian cuisine. Use this to make a Thai-style soup or an Indian curry with some rice that features ginger, coriander, cumin seeds and green chillies.
For European dishes try using the classic London dry style of Tanqueray Gin instead, which has notes of juniper berries combined with lemon peel.
If you love fresh herbs than go ahead and use Hendricks’ Gin’s sweet floral flavour made from rose petals in your cocktail by mixing it up with sugar syrup infused honeydew melon cubes.
Spice flavoured gins are great for making marinades with. Try using Old Raj Gin which has distinctive flavour of black pepper and coriander to marinate chicken or lamb before cooking on the BBQ.
For dessert, why not try something different like making a raspberry gin sorbet? Simply mix together fresh raspberries, caster sugar syrup and some pink grapefruit juice then place in the freezer.
Fruit flavoured gins are better to make desserts with. Try using Moniack Gin which has a blend of strawberry and raspberry to add an extra dimension when cooking desserts such as pavlova or fruit salads.
Old Bakery Gin is best used for marinating seafood.
Archangel Gin can be used to make dishes such as venison, beef and lamb even more tasty.
For barbecues try using Rich Tea gin which has a touch of Ceylon tea leaves added to the mix; this will add an extra dimension when cooking meats on your barbecue.

If you have little bits of gin remaining in bottles after festivities or parties, you can use these for your cooking, and you can be sure of some delectably flavoured dishes that will elevate your cooking to the next level.

What Are Personal Protective Equipment? Why Are They Needed In The Workplace?

Why do personal protective equipment need to be worn in the workplace

A workplace can consist of many dangers and hazards and personal protective equipment helps protect the worker to avoid injury. Workers are often exposed to sharp tools, dangerous chemicals and can even be harmed by objects that fall onto them while working with machinery overhead. There is also a risk of getting hurt when something falls on you if you’re not wearing PPE like proper footwear that protects your feet, not only because these kinds of accidents could cause serious injuries that would take time away from work, but also due to the fact they may result in lawsuits against employers who didn’t do everything possible to keep their workers safe from such hazards and dangers.

PPE can also protect you in other ways, like when it comes to your hearing. Loud noises in the workplace not only raise sound levels way beyond safe limits for humans, they can seriously damage people’s ability to hear over time and cause permanent hearing loss if workers are exposed to these high decibel sounds all day long, every workday of their lives. With this type of personal protective equipment that protects against noise exposure hazards, employers need not worry about their staff suffering from such severe safety concerns because they simply failed to put PPE into place at their worksites. Employers in these industries should also consider getting regular noise monitoring services so that they can know if any employees are in danger due to exposure to loud noise levels.

Different types of PPE, including hard hats, goggles, gloves, and ear plugs

There are many different types of PPE which are needed for different uses. These include:

Hard hats: a hard hat is not going to protect an office worker from getting hit in the head with a falling object. It is used when there are hazardous working conditions that could lead to injury or death without them being worn by workers on site.
Goggles: Goggles help keep dust out of eyes when using power tools such as sanders or grinders so they don’t get bits of metal into their eyes which can cause blindness.
Gloves: Gloves allow people who do work where they need dexterity like electricians and auto mechanics so hands are not burned while performing tasks around hot machinery.
Ear plugs: These prevent hearing loss in places where there are loud noises like airports, construction sites and factories.
Respirators: Respirators are important in instances where there are dusty, mouldy or chemical fumes in the air. They prevent inhalation of dangerous substances which can cause respiratory illness.
Face mask/surgical masks: Face masks protect against contagious viruses that people may be exposed to at work such as colds, flu etc. Surgical masks also help do this but they are slightly different because they cover nose and mouth completely instead of just face area around nose and mouth.
Heavy duty safety boots: Safety footwear is important for protecting feet from injury on slippery surfaces caused by spills or wet floors due to leakage in pipelines, or even from falling heavy objects.

Why these pieces of equipment are necessary for workers

Without these specific types of equipment, workers will not be protected from the many different risks that exist in the workplace. These risks include bodily fluids, chemicals and sharp objects. Especially in the current context with the Covid-19 pandemic, it is very important that all workers are provided with the best protection they need, and that they follow strict guidelines in order to stay safe.

The importance of wearing a respirator when working with chemicals or hazardous materials

Chemicals and other hazardous materials can cause severe respiratory illness if workers are not wearing the proper equipment, and these illnesses can have life-long effects on their health. If respirators are being used, it is essential that the employer conducts respirator fit testing so that they can ensure that the respirator is fitted properly to each worker’s face.

Respirator fit testing is conducted by having each worker wear a respirator for several minutes. Then, an individual does not wear the mask at all and are asked to take deep breaths in order to determine if they can detect any leakage. If there is no leakage detected, it means that the mask fits appropriately on their face.

One thing employers need to be cautious about when conducting respirator fit testing is making sure that workers do not have facial hair, because this makes it very difficult for them to properly seal around the nose of the mask. This could result in hazardous materials entering into their respiratory system which would cause further health issues down the road.

While giving workers the right protective gear is important, it is also important that these items are replaced with new ones no sooner wear and tear is detected. Otherwise, if workers continue to use damaged personal protective equipment, they risk further injury and health issues.

What Is A Health & Safety Audit, And Why Is It Needed?

Why is it needed?

A workplace health and safety audit is required in order to ensure that employees are working in a safe environment. An organization must conduct an annual workplace health and safety audit to ensure compliance with legislation on occupational health and safety. This helps the organisation to make sure that they are adhering to the laws and regulations set out by the government.

How to find the right auditor for you

Who conducts a health and safety audit? A risk assessment engineer or auditor or an independent party who carries out WHS consultation, will be assigned the task of conducting an initial examination of your business, process, equipment, materials, people, and procedures for their compliance with legislation on occupational health and safety. This will include:

Examining any documentation you may have about how work within your business is carried out (for example manuals).
Making site visits both during normal operational hours as well as off-shift where possible.
Speaking with those employees who have specific duties and responsibilities in relation to occupational health and safety matters.

The audit is usually carried out over a one-day period, but this can vary depending on the size of your business or how complex it is.

How do you know if you have picked the right auditor? The first thing to consider when choosing an auditor for your health & safety assessment is their ability to provide a service that meets all of your expectations. Make sure they are fully qualified with appropriate accreditations. You should check whether they work alone or as part of a larger team; both options will be able to offer impartial advice, however working with a larger team may give you access to a wider range of knowledge and expertise such as occupational hygienists in Australia and other specialists in workplace health and safety. You should also check that they have the necessary experience in your industry sector or similar sectors, as this will help them find any potential risks quickly.

Once you have chosen an auditor, it is time for them to carry out their health & safety audit on-site, so they can see exactly what is going on within your business premises. This may mean speaking with employees directly about the ways work activities are carried out.

Steps to help make sure your business passes a health & safety audit

While it is important to ensure that your business has a health and safety audit carried out, it is also vital that you follow through by making the necessary changes. Once you have undergone an on-site inspection from an auditor, there are certain steps you can take to help make sure they pass your health and safety audit, such as:

Make sure that your employees are given the proper training they need to carry out their tasks safely.
Ensure that all of your equipment is up-to-date and can be operated in a safe manner.
Don’t hesitate to have another health & safety audit carried out if you feel it is necessary, even if the auditor tells you everything looks good.

How often should companies have their audits performed, and who should perform them on behalf of your company

A health and safety audit should ideally be carried out once every year, in order to keep track of the health and safety standards implemented in your company. They can be carried out by an outside firm or even by employees that are particularly interested in keeping up to date on these matters, so long as they have received training for this purpose.

Certain regulations could change over time, and getting a regular audit means that you are kept aware of these changes and can stay on top of things. There are independent consultants who are accredited with national health and safety authorities, and who are well experienced and skilled to carry out these audits. They will look at different factors inside your company, and make the necessary recommendations to the management for changes to be made. The audit will also look at your work organization, and how it affects health and safety in the workplace; they may find that there are too many people working on a particular task for example, which is not safe or efficient.

Some of these audits can take several days depending upon the size of your company, but this ensures that every aspect has been covered by them. They will make recommendations, if necessary, but most importantly they give an independent view about where improvements can be made in order to keep everyone safe while performing their jobs safely.

Many companies actually include health and safety as part of their ISO standards (a management system based around quality), so getting regular audits done becomes even more important when you have such high standards to adhere to and hence, provide the best possible service to your customers.

Marketing 101: How To Be E-FFECTIVE at E-MARKETING?

E Marketing or “email marketing,” is the same as direct mail marketing except that instead of sending mail through the postal service, messages are sent electronically via email. But with all the spam polluting the World Wide Web, how can your E-Marketing campaign filter through, towards success?

There are tips and tricks to get the best results when putting together an “E-Blast,” or email campaign:


· Don’t send too many emails. Once a month is enough contact with customers or potential customers. Try and make it the same date every month, so they can come to expect it–showing your dependability. Also it will protect your brand. Sometimes companies get over zealous with E Marketing and send so many emails that they get black listed, and marked as Spam. Remember you want your emails to be a delight, not an annoyance.

· The subject “matter.” Whatever the subject of your email, make sure it is appropriate for your targeted recipients. Remember this is your one time per month to grab their attention for possible future business. Also, don’t try to lure them in under false pretenses with a misleading subject. The recipient might feel tricked or foolish, which could give your company a dishonest impression.

· Content is king.Now that you have their attention make sure you you’re your content is fresh and informative. Don’t be afraid to be (appropriately) funny, or present a new idea. But keep it short and to the point. The average person is bombarded with daily emails, and does not want to spend a lot of time reading lengthy emails.

· Make sure to pass your own test. Sometimes when you send an e blast, it looks different than expected. So make sure to send it to yourself, and several outside email addresses to see if all your characters properly convert. Make sure to send it to a fresh pair of eyes. Sometimes we miss spelling mistakes and grammatical errors, because we have been working on something so long it all starts to look correct. A fresh pair of eyes brings a fresh perspective, and can help you catch those little tweaks you need to make. Also you can see if the subject you picked doesn’t land your email into the spam folder. If you can’t beat your own spam folder, you might not beat someone else’s.


· Personalize your emails. Even though you are sending a massive email, don’t make them seem generic. Almost all E Marketing software has a feature where you can place the appropriate fields to personalize names into the email. Sometimes giving that little personal touch makes all the difference when wooing new customers, or retaining old ones.

· Avoid spam triggers. Be careful when you pick your subject headlines. Certain words, phrases, or symbols will flag your email as being spam. Some examples of common spam word triggers are: free, save, discounts, check, call, claims, here, or marketing. Some examples of spam-friendly phrases are: “All new, buy direct, free preview, free offer, get it now, or no-obligation” Also, never write your subject in all caps, and avoid the use of dollar signs and exclamation points!